The issue was that the caching mechanism for the UUID to repository path
association tried to be too smart and ended up buggy. This removes the
parts that skip updating the UUIDs for already-in-cache repository
paths. This change makes updating the cache more expensive, but since
https://codeberg.org/forgejo-aneksajo/forgejo-aneksajo/pulls/65 is
merged it should be fast enough to be fine.
Fixes#83.
Reviewed-on: https://codeberg.org/forgejo-aneksajo/forgejo-aneksajo/pulls/86
Co-authored-by: Matthias Riße <m.risse@fz-juelich.de>
Co-committed-by: Matthias Riße <m.risse@fz-juelich.de>
Previously pushing to a not-yet-initialized repository would not
properly initialize git-annex until the repository's page was visited. A
`git annex sync --content` also didn't immediately transfer data,
instead requiring a second invocation (after the workaround of visiting
the repo page).
Push-to-create was also broken with p2phttp because git-annex tried to
read the repositories config before pushing anything, got a 404, and set
`annex-ignore=true`. It then required a manual `git annex enableremote
origin` to get git-annex to use the remote.
This fixes these issues by:
1. making requests to a repository's config endpoint use the
push-to-create logic
2. initializing the repository for git-annex if a git-annex client makes
a request to the config endpoint
This brings the p2phttp behavior in line with ssh behavior, where `git
annex sync --content` issues a `git-annex-shell configlist` with
`autoinit=1`.
Fixes#85.
Reviewed-on: https://codeberg.org/forgejo-aneksajo/forgejo-aneksajo/pulls/84
Co-authored-by: Matthias Riße <m.risse@fz-juelich.de>
Co-committed-by: Matthias Riße <m.risse@fz-juelich.de>
In some situations it could happen that `git annex p2phttp` needs some
kind of maintenance work resulting in a commit, but without a configured
git identity p2phttp would refuse to run. This could break p2phttp
support.
Setting `GIT_AUTHOR_{NAME,EMAIL}` should remedy this issue.
Fixes#69.
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [ ] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
- [x] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Reviewed-on: https://codeberg.org/forgejo-aneksajo/forgejo-aneksajo/pulls/70
Co-authored-by: Matthias Riße <m.risse@fz-juelich.de>
Co-committed-by: Matthias Riße <m.risse@fz-juelich.de>
This makes it such that annexed files are treated like plain git files
in comparisons (e.g. the diff of a commit).
It also changes the image diff viewer to show a more reasonable error
message when one of the annexed files under comparison is missing.
Fixes#56.
Reviewed-on: https://codeberg.org/forgejo-aneksajo/forgejo-aneksajo/pulls/57
Co-authored-by: Matthias Riße <m.risse@fz-juelich.de>
Co-committed-by: Matthias Riße <m.risse@fz-juelich.de>
This eliminates the wait time for the first p2phttp connection since
server startup at the cost of adding that time to the startup itself.
Reviewed-on: https://codeberg.org/forgejo-aneksajo/forgejo-aneksajo/pulls/59
Co-authored-by: Matthias Riße <m.risse@fz-juelich.de>
Co-committed-by: Matthias Riße <m.risse@fz-juelich.de>
Otherwise, git-annex tries to use its own default port (9417) and fails.
Fixes#52.
Reviewed-on: https://codeberg.org/forgejo-aneksajo/forgejo-aneksajo/pulls/55
Co-authored-by: Matthias Riße <m.risse@fz-juelich.de>
Co-committed-by: Matthias Riße <m.risse@fz-juelich.de>
This adds a new endpoint under `/git-annex-p2phttp` which acts as an
authenticating proxy to git-annex' p2phttp server. This makes it
possible to set `annex+<server-url>/git-annex-p2phttp` as
`remote.<name>.annexurl` and use git-annex fully over http(s) with the
normal credentials and access tokens provided by Forgejo.
Fixes#25.
Reviewed-on: https://codeberg.org/matrss/forgejo-aneksajo/pulls/42
Co-authored-by: Matthias Riße <m.risse@fz-juelich.de>
Co-committed-by: Matthias Riße <m.risse@fz-juelich.de>
Previously, an external renderer that matched on an annexed file would
only see its content streamed via `STDIN`, or a temporary file with a copy
of its content would be generated and passed-by-filepath (with
`IS_INPUT_FILE=true`). Whether that happens, is also subject to
`MAX_DISPLAY_FILE_SIZE` (which defaults to 8MB).
This was problematic, because annexed files tend to be large. Moreover,
if present, they already exist as write-protected files on the
file-system. Creating a copy is both expensive and serves no particular
purpose.
This commit changes how external renderers are called.
1) With `IS_INPUT_FILE=true`, the renderer is passed the true location
of an annex key, if present, and an empty path, if not.
2) The original, repository-relative path of the rendering target is
made available to the renderer via the `GITEA_RELATIVE_PATH`
environment variable.
To achieve a lean implementation, the `Blob` of the rendering target
is passed on to the `RenderContext` (because the implementation of
the annex-related functionality is centered on this dtype.
This change makes it less costly to increase `MAX_DISPLAY_FILE_SIZE`,
in order to make large, annexed files eligible for markup rendering,
because no content copies will be made any longer.
External renderers can now use the original file path, with the full
original filename, including extensions, for decision making. For
example, to detect particular compression formats based in a file name
extension, or to alter the rendering based on contextual information
encoded in the file path (e.g., a multi-file data structure with a
particular organization pattern).
Apart from the additional environment variable, there is no change to
the handling of renderers that take their input via `STDIN` (i.e.,
`IS_INPUT_FILE=false`).
Fixes#35.
Reviewed-on: https://codeberg.org/matrss/forgejo-aneksajo/pulls/36
Reviewed-by: matrss <matrss@noreply.codeberg.org>
Co-authored-by: Michael Hanke <michael.hanke@gmail.com>
Co-committed-by: Michael Hanke <michael.hanke@gmail.com>
Previously, trying to view files that were annexed, but missing, just
led to an uninformative error 500. This was rather confusing.
With these changes it now shows the pointer target instead of the
(missing) content of the file, and also indicates this situation in the
"stored with git-annex" message. For semantic correctness views for
missing files return a 404 instead of a 200, as they would with the
content present.
Fixes#7, fixes#13.
Reviewed-on: https://codeberg.org/matrss/forgejo-aneksajo/pulls/28
Co-authored-by: Matthias Riße <m.risse@fz-juelich.de>
Co-committed-by: Matthias Riße <m.risse@fz-juelich.de>
This updates the repo index/file view endpoints so annex files match the way
LFS files are rendered, making annexed files accessible via the web instead of
being black boxes only accessible by git clone.
This mostly just duplicates the existing LFS logic. It doesn't try to combine itself
with the existing logic, to make merging with upstream easier. If upstream ever
decides to accept, I would like to try to merge the redundant logic.
The one bit that doesn't directly copy LFS is my choice to hide annex-symlinks.
LFS files are always _pointer files_ and therefore always render with the "file"
icon and no special label, but annex files come in two flavours: symlinks or
pointer files. I've conflated both kinds to try to give a consistent experience.
The tests in here ensure the correct download link (/media, from the last PR)
renders in both the toolbar and, if a binary file (like most annexed files will be),
in the main pane, but it also adds quite a bit of code to make sure text files
that happen to be annexed are dug out and rendered inline like LFS files are.
Previously, Gitea's LFS support allowed direct-downloads of LFS content,
via http://$HOSTNAME:$PORT/$USER/$REPO/media/branch/$BRANCH/$FILE
Expand that grace to git-annex too. Now /media should provide the
relevant *content* from the .git/annex/objects/ folder.
This adds tests too. And expands the tests to try symlink-based annexing,
since /media implicitly supports both that and pointer-file-based annexing.
Usage of `path` was replaced by `path/filepath` in upstream forgejo, and
it made sense to use that as well where `path` was previously used. The
`setHeaderCacheForever` function and the `sendFile` method had their
signature changed.
This makes HTTP symmetric with SSH clone URLs.
This gives us the fancy feature of _anonymous_ downloads,
so people can access datasets without having to set up an
account or manage ssh keys.
Previously, to access "open access" data shared this way,
users would need to:
1. Create an account on gitea.example.com
2. Create ssh keys
3. Upload ssh keys (and make sure to find and upload the correct file)
4. `git clone git@gitea.example.com:user/dataset.git`
5. `cd dataset`
6. `git annex get`
This cuts that down to just the last three steps:
1. `git clone https://gitea.example.com/user/dataset.git`
2. `cd dataset`
3. `git annex get`
This is significantly simpler for downstream users, especially for those
unfamiliar with the command line.
Unfortunately there's no uploading. While git-annex supports uploading
over HTTP to S3 and some other special remotes, it seems to fail on a
_plain_ HTTP remote. See https://github.com/neuropoly/gitea/issues/7
and https://git-annex.branchable.com/forum/HTTP_uploads/#comment-ce28adc128fdefe4c4c49628174d9b92.
This is not a major loss since no one wants uploading to be anonymous anyway.
To support private repos, I had to hunt down and patch a secret extra security
corner that Gitea only applies to HTTP for some reason (services/auth/basic.go).
This was guided by https://git-annex.branchable.com/tips/setup_a_public_repository_on_a_web_site/
Fixes https://github.com/neuropoly/gitea/issues/3
Co-authored-by: Mathieu Guay-Paquet <mathieu.guaypaquet@polymtl.ca>
[git-annex](https://git-annex.branchable.com/) is a more complicated cousin to
git-lfs, storing large files in an optional-download side content. Unlike lfs,
it allows mixing and matching storage remotes, so the content remote(s) doesn't
need to be on the same server as the git remote, making it feasible to scatter
a collection across cloud storage, old harddrives, or anywhere else storage can
be scavenged. Since this can get complicated, fast, it has a content-tracking
database (`git annex whereis`) to help find everything later.
The use-case we imagine for including it in Gitea is just the simple case, where
we're primarily emulating git-lfs: each repo has its large content at the same URL.
Our motivation is so we can self-host https://www.datalad.org/ datasets, which
currently are only hostable by fragilely scrounging together cloud storage --
and having to manage all the credentials associated with all the pieces -- or at
https://openneuro.org which is fragile in its own ways.
Supporting git-annex also allows multiple Gitea instance to be annex remotes for
each other, mirroring the content or otherwise collaborating the split up the
hosting costs.
Enabling
--------
TODO
HTTP
----
TODO
Permission Checking
-------------------
This tweaks the API in routers/private/serv.go to expose the calling user's
computed permission, instead of just returning HTTP 403.
This doesn't fit in super well. It's the opposite from how the git-lfs support is
done, where there's a complete list of possible subcommands and their matching
permission levels, and then the API compares the requested with the actual level
and returns HTTP 403 if the check fails.
But it's necessary. The main git-annex verbs, 'git-annex-shell configlist' and
'git-annex-shell p2pstdio' are both either read-only or read-write operations,
depending on the state on disk on either end of the connection and what the user
asked it to ask for, with no way to know before git-annex examines the situation.
So tell the level via GIT_ANNEX_READONLY and trust it to handle itself.
In the older Gogs version, the permission was directly read in cmd/serv.go:
```
mode, err = db.UserAccessMode(user.ID, repo)
```
- 966e925cf3/internal/cmd/serv.go (L334)
but in Gitea permission enforcement has been centralized in the API layer.
(perhaps so the cmd layer can avoid making direct DB connections?)
Deletion
--------
git-annex has this "lockdown" feature where it tries
really quite very hard to prevent you deleting its
data, to the point that even an rm -rf won't do it:
each file in annex/objects/ is nested inside a
folder with read-only permissions.
The recommended workaround is to run chmod -R +w when
you're sure you actually want to delete a repo. See
https://git-annex.branchable.com/internals/lockdown
So we edit util.RemoveAll() to do just that, so now
it's `chmod -R +w && rm -rf` instead of just `rm -rf`.
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/7261
- When trying to view a submodule directory via the normal `/src/branch/` path, generate a redirect link to the submodule location.
- Resolvesforgejo/forgejo#5267
Co-authored-by: Gnarwhal <git.aspect893@passmail.net>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7450
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport of forgejo/forgejo#7422**
- Add new translations, if an existing one couldn't be used.
- Use existing translations, if one existed and fit the purpose.
- Spotted by the lint-locale-usage tooling by @fogti.
(cherry picked from commit bd9366e7fc)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7430
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-committed-by: Gusted <postmaster@gusted.xyz>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/7395
- Add `binding:"In(...)"` to the `default_merge_style` and `default_update_style` fields to only accept recognized merge and update styles.
- Resolvesforgejo/forgejo#7389
- Added integration test for the API (`binding` works in the exact same way for the API and web routes).
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7401
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
- This is a follow up on #7193 and resolves#6312.
- The ID by itself is not very useful, so also return the index of the workflow run.
Co-authored-by: Klaus Fyhn <klausfyhn@gmail.com>
Co-authored-by: Klaus Fyhn <klfj@mir-robots.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7286
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: klausfyhn <klausfyhn@noreply.codeberg.org>
Co-committed-by: klausfyhn <klausfyhn@noreply.codeberg.org>
- The router must use the escaped path in order to ensure correct functionality (at least, that is what they say). However `req.URL.Path` shouldn't be set to the escaped path, which is fixed in this patch.
- Simplify the logic and no longer try to use `rctx.RoutePath`, this is only useful if the middleware was placed after some routing parsing was done.
- Resolvesforgejo/forgejo#7294
- Resolvesforgejo/forgejo#7292
- Add unit test
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7295
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-committed-by: Gusted <postmaster@gusted.xyz>
Per #6507, platform information was missing from the rubygems package registry, so binary gems where not served correctly. This change adds the platform information when necessary.
Co-authored-by: f <f@sutty.nl>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7257
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: fauno <fauno@noreply.codeberg.org>
Co-committed-by: fauno <fauno@noreply.codeberg.org>
- `releasesToFeedItems` is called to convert release structs to feed items, which is then used to render RSS or Atom feeds.
- Optimize the loading of attributes for the releases, introduce `ReleaseList` type which uses caching to load repository and publishers. It also no longer loads release attachments and downloads counts as that is not used in feed items.
- Optimize the composing of meta by introducing caching, this operation is especially slow when the owner is an organization.
- Add unit test (ensures new `LoadAttributes` works correctly).
- Add integration test (ensures that feed output is still as expected).
Loading https://codeberg.org/forgejo/forgejo/releases.rss reduced from ~15s to ~1s. (It is currently is deployed on codeberg.org)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7221
Reviewed-by: Otto <otto@codeberg.org>
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-committed-by: Gusted <postmaster@gusted.xyz>
- Instead of creating errors via `google.golang.org/grpc`, use `connectrpc.com/connect`.
- This _avoids_ another dependency (still indirectly referenced in testing).
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7222
Reviewed-by: Otto <otto@codeberg.org>
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-committed-by: Gusted <postmaster@gusted.xyz>
- When the API endpoint `/repos/{owner}/{repo}/actions/workflows/{workflowname}/dispatches` is used to launch a workflow, it currently returns no data; `/repos/{owner}/{repo}/actions/tasks` can be used to track the progress of a workflow, but you need at least that workflow's run_id and the quantity of its child jobs. Tracking workflow progress is especially important if you want to chain together multiple workflows that exist within different repositories, which is desired for https://codeberg.org/forgejo/forgejo/issues/6312.
- Make it possible to track the progress of manually triggered workflows by modifying the `/repos/{owner}/{repo}/actions/workflows/{workflowname}/dispatches` to return a JSON object containing the triggered workflow's id and a list of its child job names.
Co-authored-by: Andrii Chyrva <achyrva@amcbridge.com>
Co-authored-by: Andrii Chyrva <andrii.s.chyrva@hotmail.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7193
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: markturney <markturney@gmail.com>
Co-committed-by: markturney <markturney@gmail.com>
Fuzzy searching for code has been known to be problematic #5264 and in my personal opinion isn't very useful.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/6947
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Co-committed-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Corrected miss-spelled description for the `is_private` field on `repoSearch`, in which 'public' was spelled as 'pubic'.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7199
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: luxzi <lesson085@gmail.com>
Co-committed-by: luxzi <lesson085@gmail.com>
Allow translating theme names. Not even for i18n reasons but because this way the menu is clearer and cleaner.
The number of translated entries is kept minimal for now. It is easy to pollute locales with these names otherwise.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7168
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
- Replies to pending review comments no longer generate a notification, this was caused by an incomplete determination if the comment was part of the pending review or not.
- The logic was reworked to do the following if it's part of a pending review: It is not a single review and if it's a reply then the comment it is replying to is part of a pending review.
- Added integration test.
- Resolvesforgejo/forgejo#7151
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7167
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-committed-by: Gusted <postmaster@gusted.xyz>
`AllThemes` is only used by `user/settings/appearance.tmpl`, not by all settings pages.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7163
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: 0ko <0ko@noreply.codeberg.org>
Co-committed-by: 0ko <0ko@noreply.codeberg.org>
- Add the ability to regenerate existing access tokens in the UI. This preserves the ID of the access token, but generates a new salt and token contents.
- Integration test added.
- Unit test added.
- Resolves#6880
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/6963
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Dmitrii Sharshakov <d3dx12.xx@gmail.com>
Co-committed-by: Dmitrii Sharshakov <d3dx12.xx@gmail.com>
## Dropping SSPI auth support
SSPI authentication relied on Microsoft Windows support, removal started in https://codeberg.org/forgejo/forgejo/pulls/5353, because it was broken anyway. We have no knowledge of any users using SSPI authentication. However, if you somehow managed to run Forgejo on Windows, or want to upgrade from a Gitea version which does, please ensure that you do not use SSPI as an authentication mechanism for user accounts. Feel free to reach out if you need assistance.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/7148
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Otto Richter <otto@codeberg.org>
Co-committed-by: Otto Richter <otto@codeberg.org>
- Simplify if-else expression to `NotFoundOrServerError`.
- I cannot find an existing scenario where `Getdiff` returns an error
and where it therefore should show a 404 error in the context of
rendering a diff of a commit. So simply return it as an Internal Server
Error, this also helps with debugging if an actual error occurs
here (404 errors are only logged at the DEBUG level).
- The first change is already covered under existing testing, the second
change is not trivial to test.
Closes: https://codeberg.org/forgejo/forgejo/issues/6042
Continuation of: https://codeberg.org/forgejo/forgejo/pulls/6284
Replaces: https://codeberg.org/forgejo/forgejo/pulls/6285
Context: https://codeberg.org/forgejo/forgejo/pulls/6284#issuecomment-2518599
Create a new type of comment: `CommentTypeAggregator`
Replaces the grouping of labels and review request in a single place: the comment aggregator
The whole list of comments is "scanned", if they can get aggregated (diff of time < 60secs, same poster, open / close issue, add / del labels, add /del review req), they are added to the aggregator.
Once needed, the list of all the aggregated comments are replaced with a single aggregated comment containing all the data required.
In templates, have a specific HTML rendering part for the comment aggregator, reuse the same rendering as with the other types of comments.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/6523
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Reviewed-by: Otto <otto@codeberg.org>
Co-authored-by: Litchi Pi <litchi.pi@proton.me>
Co-committed-by: Litchi Pi <litchi.pi@proton.me>
The main change here is to use `datalist` for pronouns This supports
(see also docs[1]):
* Displaying the value already set by the user (if any), otherwise
* Presenting a list of common options to the user, and
* Allowing them to freely enter any value
This setup requires no additional JS and resolves[2].
This is different from the previous flow which used, if JS was available:
* A menu for a default 'recognised' set of pronouns, and if the user
wanted another value:
* An extra text div if the user wanted to enter custom pronouns
Without JS enabled both the menu and the custom text div would always be
displayed.
This change means there's no longer a distinction between 'custom' and
'recognised' pronouns (this difference looks to have only been made in
code, and not in any data models).
Link: https://developer.mozilla.org/en-US/docs/Web/HTML/Element/datalist [1]
Link: https://codeberg.org/forgejo/forgejo/issues/6774 [2]
Co-authored-by: Matthew Hughes <matthewhughes934@gmail.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/6835
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Reviewed-by: Otto <otto@codeberg.org>
Co-authored-by: mhughes9 <mhughes9@noreply.codeberg.org>
Co-committed-by: mhughes9 <mhughes9@noreply.codeberg.org>
Fix the problem of untranslated text on the actions page
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit ce65613690e4564d9961f847ebd6eb2137f0c885)
